Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse.

1 (power) indicator

If the 1 (power) indicator is green

1Turn off the AC power switch and disconnect the video signal cables from the INPUT1 and INPUT2 connectors of the media engine.

2Press the AC power switch twice to turn the monitor off and then on.

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orangePress the 1 (power) switch twice to turn the monitor off and then on.

If the 1 (power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and graphic board.

Specifications

LCD panel

Panel type: a-Si TFT Active Matrix

 

Picture size: 15 inch (38 cm)

Input signal format

RGB operating frequency*

 

Horizontal: 30 – 61 kHz

 

Vertical: 48 – 85 Hz

 

(only XGA mode at 75 Hz)

Resolution

Horizontal: Max.1024 dots

 

Vertical: Max.768 lines

Input signal levels

RGB video signal

 

0.700 Vp-p, 75 Ω, positive

 

SYNC signal

 

TTL level, 2 kΩ,

 

positive or negative

 

Separate horizontal and vertical,

 

or composite sync)

 

0.3 Vp-p, 75Ω, negative

 

(Sync on green)

Audio output

2W × 2

Headphones jack

Stereo minijack

 

Accepts impedance of 16 – 48 Ω

AUDIO IN jack

Stereo minijack

 

Accepts impedance of 47 kΩ

 

Accepts level 0.5 Vrms

Power requirements

100 – 240 V, 50 – 60 Hz, 0.55 – 0.3 A

Power consumption

Max. 35 W

Operating temperature

5 – 35 ° C

Dimensions (width/height/depth)

 

Display (upright):

 

Approx. 356 × 347 × 185 mm

 

(14 1/8 × 13 3/4 × 7 3/8 inches)

 

Media engine (without stand):

 

Approx. 45 × 180 × 180 mm

 

(1 13/16 × 7 1/8 × 7 1/8 inches)

 

Media engine (with stand):

 

Approx. 94 × 185 × 180 mm

 

(3 3/4 × 7 3/8 × 7 1/8 inches)

Mass

Display:

 

Approx. 2.7 kg (5 lb 15 oz)

 

Media engine (with stand):

 

Approx. 0.85 kg (1 lb 14 oz)

Plug & Play

DDC1/DDC2B/DDC2Bi

Accessories

See page 8.

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

22