Resetting the adjustments (RESET)

This monitor has the following two reset methods. Use the RESET menu to reset the adjustments.

1Press the MENU button.

The main menu appears on the screen.

2Press the M(+)/m(–) buttons to select 0 (RESET) and press the OK button.

The RESET menu appears on the screen.

Reset the settings according to the following instructions.

Resetting the adjustment data most appropriately for the current input signalPress the M(+)/m(–) buttons to select SCREEN RESET and press the OK button.

The automatic picture quality adjustment function of this monitor automatically adjusts the picture position, phase, and pitch, to the most appropriate value. If this function is activated, the phase is automatically adjusted whenever the monitor receives the same input signal.

The RESET menu is automatically returned to the main menu after the adjustment data is reset.

Resetting all of the adjustment data for all input signalsPress the M(+)/m(–) buttons to select ALL RESET and press the OK button.

The RESET menu is automatically returned to the main menu after the adjustment data is reset.

To cancel resettingPress the M(+)/m(–) buttons to select and press theOK button.

The RESET menu returns to the main menu without resetting the adjustment data.

Additional settings (Option)

You can adjust the following options:

•WIDE STEREO

•BASS BOOST

•BACKLIGHT

•LIGHT SENSOR

•POWER SAVE

•USER SENSOR

•LANGUAGE

•MENU LOCK

1Press the MENU button.

The main menu appears on the screen.

2Press the M(+)/m(–) buttons to select m.

The option menu appears on the screen.

3Press the M(+)/m(–) buttons to select the desired option item and press the OK button.

Adjust the selected option item according to the following instructions.

Increasing the soundscape (wide stereo function)

This adjustment makes use of the DSP and creates the illusion of

 

the built-in stereo speaker being further away than it actually is,

GB

thus enhancing sound presence.

First press the M(+)/m(–) buttons to select (WIDE

STEREO) and press the OK button. Then press the M(+)/m(–) buttons to select either 2, 1, or OFF.

The wide stereo function is used to increase the soundscape. Selecting 1 or 2 increases incrementally the soundscape effect toward the front of the monitor.

Notes

•If your connected computer or audio equipment uses special sound functions, such as surround sound, be sure to turn these functions off. If these functions are being used with the wide stereo function of this monitor, the wide stereo function may not function properly and thus not produce the desired sound effect.

•This function is automatically turned off when you use headphones. However, in this case, the indication in the WIDE STEREO menu does not change.

•The wide stereo function allows you to increase the soundscape by converting the analog signals into digital. The sound may be distorted depending on the input signal and music. In this case, decrease the volume or set the wide stereo function to OFF.

Boosting the bass (bass boost function)

This option increases the bass output of the speaker.

First press the M(+)/m(–) buttons to select (BASS

BOOST) and press the OK button. Then press the M(+)/m(–) buttons to select either ON or OFF.

(continued)

15