Displaying this monitor’s information

While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears.

Press the MENU button again to make the box disappear.

Example

MENU

INFORMATION

Model

 

 

 

 

MODEL : SDM-S204E

name

 

 

 

SER. NO : 1234567

Serial

 

MANUFACTURED : 2004-40

number

 

 

Week and year

 

 

of manufacture

If any problem persists, call your authorized Sony dealer and give the following information:

•Model name: SDM-S204E

•Serial number

•Detailed description of the problem

•Date of purchase

•Name and specifications of your computer and graphics board

•Type of input signals (analog RGB/digital RGB)

Specifications

LCD panel

Panel type: a-Si TFT Active Matrix

Picture size: 20.1 inch (51 cm) Input signal format

RGB operating frequency* Horizontal: 28–92 kHz (analog RGB)

28–75 kHz (digital RGB)

Vertical:48–85 Hz (analog RGB) 60 Hz (digital RGB)

Resolution

Horizontal: Max.1600 dots

Vertical: Max.1200 lines Input signal levels

Analog RGB video signal:

0.7Vp-p, 75 Ω, positive

SYNC signal:

TTL level, 2.2 kΩ, positive or negative (Separate horizontal and vertical, or composite sync)

0.3Vp-p, 75 Ω, negative (Sync on green) Digital RGB (DVI) signal: TMDS (Single link)

Power requirements

100–240 V, 50–60 Hz, Max. 1.2 A Power consumption

Max. 58 W

Operating temperature 5–35°C

Dimensions

Display (upright): With stand

Width: 440.5 mm (17 3/8 inches)

Height: 377.5 – 477.5 mm (14 7/8 – 18 7/8 inches)

Depth: 232.0 – 248.0 mm (9 1/4 – 9 7/8 inches) Without stand

Width: 440.5 mm (17 3/8 inches)

Height: 354.5 mm (14 inches)

Depth: 72.5 mm (2 7/8 inches)

Mass

Approx. 8.2 kg (18 lb 1 1/4 oz) (with stand) Approx. 6.2 kg (13 lb 11 oz) (without stand)

Plug & Play DDC2B

Accessories See page 6.

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

22