Symptom | Check these items |
Picture is fuzzy. | • Adjust the brightness and contrast (page 12). |
| • Adjust the pitch and phase (analog RGB signal only) (page 13). |
| • Adjust the smoothing (page 12). |
| xProblem caused by a connected computer or other equipment, and not |
| caused by the monitor |
| • Set the resolution to 1600 ⋅ 1200 on your computer. |
|
|
Picture is ghosting. | • Eliminate the use of video cable extensions and/or video switch boxes. |
| • Check that all plugs are firmly seated in their sockets. |
Picture is not centered or sized properly (analog RGB signal only).
Picture is too small. | • | Set the zoom setting to “FULL2” (page 15). |
| ||
|
| xProblem caused by a connected computer or other equipment, and not |
| ||
|
| caused by the monitor |
| ||
|
| • Set the resolution to 1600 ⋅ 1200 on your computer. |
| ||
|
|
|
|
| |
Picture is dark. | • | Adjust the brightness (page 12). |
| ||
|
| • Adjust the backlight (page 12). |
| ||
|
| • It takes a few minutes for the display to become bright after turning on the monitor. |
| ||
|
| • | Adjust the gamma on the GAMMA menu (page 15). |
| |
|
| • | The screen might turn darker, depends on ECO mode you selected. |
| |
|
|
|
|
| |
Wavy or elliptical pattern (moire) | • | Adjust the pitch and phase (analog RGB signal only) (page 13). |
| ||
is visible. |
|
|
|
| |
|
|
|
|
| |
Color is not uniform. | • | Adjust the pitch and phase (analog RGB signal only) (page 13). |
| ||
|
|
|
|
| |
White does not look white. | • | Adjust the color temperature (page 14). |
|
| |
GB | |||||
Monitor buttons do not operate | • | If “MENU LOCK” is set to “ON,” set it to “OFF” (page 16). |
| ||
( | appears on the screen). |
|
|
|
|
|
|
|
|
| |
Resolution displayed on the menu | • | Depending on the graphics board setting, the resolution displayed on the menu screen may |
| ||
screen is incorrect. |
| not coincide with the one set on the computer. |
| ||
|
|
|
|
| |
After turning off the main power, | • | When the main power is on but the 1 (power) switch is not pressed, or when the monitor |
| ||
the 1 (power) indicator stays |
| is in the power saving mode, if you turn the MAIN POWER switch off, the 1 (power) |
| ||
bright for a while. |
| indicator may not turn off right away. This is not a malfunction. |
| ||
|
|
|
| ||
|
|
|
|
|
|
21