Sony SDM-S204E Setup 3:Bundle the cords and cables, Setup 4:Turn on the monitor and computer

Setup 3:Bundle the cords and cables

1Slide up the back cover.

2Secure the video signal cables using the cable holder on the cabinet.

3Slide down the back cover.

4Bundle all the cords and cables through the cable holder of the stand.

1 3

back cover

2

Setup 4:Turn on the monitor and computer

1Press the MAIN POWER switch located on the right side of the monitor in the direction of the [ (on), if it is not already pressed. Make sure the 1 (power) indicator is lit in red.

Note

The monitor is factory shipped with the MAIN POWER switch set to [ (on).

lights in red

MAIN POWER

2Press the 1 (power) switch on the front right of the monitor.

The 1 (power) indicator lights up in green.

lights in green

4

Note

If you cannot bundle all the cords and cables through the cable holder of the stand, leave them hanging down.

3Turn on the computer.

4Press the INPUT button to select the desired input signal.

The selected input’s picture appears on the screen.

For more information, see “Selecting the input signal (INPUT button)” on page 10.

INPUT

The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture (page 11).

8