Rear of the LCD display

 

q;

9

qa

 

qs

 

qd

IAC IN connector (page 7)

This connector connects the power cord (supplied).

JHD15 input connector (analog RGB) (page 7)

This connector inputs analog RGB video signals (0.700 Vp-p, positive) and sync signals.

KDVI-D input connector (digital RGB) (page 7)

This connector inputs digital RGB video signals that comply with DVI Rev.1.0.

LCable holder (page 8)

This part secures cables and cords to the monitor.

MSecurity lock hole

The security lock hole should be used with the Kensington Micro Saver Security System.

Micro Saver Security System is a trademark of Kensigton.

Setup

Before using your monitor, check that the following items are included in your carton:

•LCD display

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•Quick Setup Guide

Setup 1:Connect the video signal cables

•Turn off the monitor and computer before connecting them.

•When connecting the computer to the monitor’s HD15 input connector (analog RGB), refer to “Connect a computer equipped with an HD15 output connector (analog RGB).”

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.

1Slide up the back cover.

2Tilt the display forward.

6