To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order.
AUJOURD. t
t
Tips
•To set the programme position, you can also use the CHAINE +/– or programme number buttons.
•To set the programme position with a two digit number, press - (ten’s digit) button followed by the programme number buttons.
•To set the line input video source, you can also use the CHAINE +/– buttons.
•To set the tape speed, you can also use the SP/LP button*.
•When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set VITESSE AUTO. to NON in the
•Even if you set OPTIONS PROGRAMM. to SHOWVIEW in the
•To check, change, or cancel the programme setting, press </, to choose LISTE, then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 60).
Notes
•When setting the timer with VPS/PDC signals, enter the start and stop times exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC function won’t work.
•If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function.
•The 
indicator flashes in the display window when you press ?/1 with no tape inserted.
•The VPS/PDC function is automatically set to NON for the timer recording of a satellite programme.
•The station name may not appear if the VCR does not receive station name information signals.
*
56
Setting the timer manually
