Symptom

Remedy

 

 

 

 

You cannot set the channel

• Check that DECODEUR/LIGNE2 in the OPTIONS-2 menu is set

 

as Canal Plus in the

to DECODEUR (see page 68).

 

REGLAGE DES CHAINES

 

 

menu.

 

Plus

 

 

You cannot watch the Canal

• Check that DECODEUR/LIGNE2 in the OPTIONS-2 menu is set

Plus programme when the

to DECODEUR (see page 68).

Canal

VCR is in standby mode.

• Make sure the Canal Plus PERITEL cable is plugged securely.

 

 

The Canal Plus programme

• Make sure the Canal Plus PERITEL cable is plugged securely.

 

is always recorded

• Check that DECODEUR/LIGNE2 in the OPTIONS-2 menu is set

 

scrambled.

to DECODEUR (see page 68).

 

 

• Check that this channel is set as Canal Plus in the REGLAGE DES

 

 

CHAINES menu (see page 34).

 

 

 

 

A tape cannot be inserted.

• Check that a tape isn’t already in the tape compartment.

 

 

 

 

The remote commander

• Make sure you are pointing the remote commander at the remote

 

does not function.

sensor on the VCR.

 

 

• Replace all the batteries in the remote commander with new ones

 

 

if they are weak.

 

 

• Make sure the [TV] / [MAGN] remote control switch is set correctly.

 

 

 

 

“L2” does not appear in the

• Check that DECODEUR/LIGNE2 in the OPTIONS-2 menu is set

 

display window.

to LIGNE2 (see page 68).

 

 

 

 

The SMARTLINK function

• Check that your TV complies with SMARTLINK, MEGALOGIC,

Others

does not work.

EASYLINK, Q-Link, EURO VIEW LINK, or T-V LINK.

 

• Make sure you use the PERITEL cable to connect the VCR and

 

your TV.

 

• Make sure the PERITEL cable is connected securely.

 

 

 

 

 

 

The tracking meter does not

• The recording condition of the tape is very poor and tracking

 

appear on the TV screen.

cannot be adjusted.

 

 

• The tracking meter does not appear when playing back an NTSC-

 

 

recorded tape.

 

 

 

 

The display window

• The display window automatically becomes dim when the VCR is

 

becomes dim.

in standby or timer recording mode.

 

 

 

 

The VCR needs to be

• Clean the cabinet, panel and controls with a dry, soft cloth, or a

 

cleaned.

soft cloth slightly moistened with a mild detergent solution. Do

 

 

not use any type of solvent, such as alcohol or benzene.

 

 

 

74

Troubleshooting

Page 74
Image 74
Sony SLV-SE450B, SLV-SE250B operating instructions Plus, Canal, Others