14 Setting up the VCR with the Auto Set Up function
filename[010get.fm] model name1[SLV-SE250B] model name2[SLV-SE450B]
[3-868-346-E2 (1)]
Step 5 : Setting up the VCR with the Auto Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the TV channels, guide channels for the
ShowView system, and VCR clock automatically.
To cancel the Auto Set Up function
Press REGLAGE AUTO.
Notes
• Do not cancel th e A ut o Set Up function. If you do, repeat the steps above.
• The Auto Set Up fu nction may require a long time to complete (approximately 15 to 18
minutes).
• Whenever you operate the Auto Set Up funct ion, some of the settings (ShowView, timer, etc.)
will be reset. If this happens, you have to set them again.
Hold down REGLAGE AUTO on the VCR for more than three seconds.
The VCR automatically turns on, starts searching for all of the receivable
channels, and presets them in the appropriate order for your local area
(according to the TV system you selected in “Tuning your TV to the
VCR”).
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme positions” on
page 22.
If you use the SMARTLINK connection, the Preset Download function
starts and the SMARTLINK indicator flashes in the display window during
download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal. If the time does
not appear, set the clock manually. See page 28.
REGLAGE AUTO
REGLAGE AUTO
REGL CANAL
010COV.book Page 14 Friday, April 14, 2000 1:07 PM