Sony SLV-SE250B Operation when recording on this VCR, Before you start editing, To stop editing

To start editing, press the X (pause) buttons on both VCRs at the same time.

Operation (when recording on this VCR)

Before you start editing	X
• Turn on your TV and set it to the
video channel.
• Press CHOIX ENTREE to display
“L1” or “L2” in the display
window.
• Press SP/LP to select the tape
speed, SP or LP.*	z ENR

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X (pause).

3 Press z ENR on this VCR to set it to recording pause.

4

To stop editing

Press the x STOP buttons on both VCRs.

Tip

•To cut out unwanted scenes while editing, press X (pause) on this VCR when an unwanted scene begins. When it ends, press X (pause) again to resume recording.

Note

•If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press z ENR again during recording pause in step 3 so the VCR analyses the tape. Then, press X (pause) after the OPC indicator stops flashing to start recording. If you press X (pause) before the OPC indicator stops flashing, the OPC function is cancelled.

* SLV-SE450B only

Additional Operations

Editing with another VCR

71