Changing menu options | Sony SLV-SE250B, SLV-SE450B specification

3 Press M/m to select the option, then press OK.

4 Press M/m to change the setting, then press OK.

5 Press MENU to return to the original screen.

Menu choices

Initial settings are indicated in bold print.

Changing menu options

1 PressOK. MENU, then select OPTIONS and press

OPTIONS

OPTIONS - 1

OPTIONS - 2

RETOUR

SELECTIONNER :

REGLER: OK

SORTIE : MENU

2 Press M/m to highlight OPTIONS-1 or OPTIONS-2, then press OK.

OPTIONS - 1

OPTIONS - 2

OPC

OUI

DECODEUR / LIGNE2

DECODEUR

VITESSE AUTO.

NON

OPTIONS PROGRAMM.

MIXTE

DUREE CASSETTE

E1 8 0

VEILLE ECO

NON

STANDARD COULEUR

AUTO

ENREG. TV DIRECT

OUI

RETOUR

RETOUR

SELECTIONNER

:

SELECTIONNER

:

REGLER

:

OK

REGLER

:

OK

SORTIE :

MENU

SORTIE :

MENU

Additional Operations

OPTIONS-1

Menu option	Set this option to

OPC	• OUI to switch on the OPC (Optimum Picture Control) function
	and improve picture quality.
	• NON to switch off OPC.

VITESSE AUTO.*	• OUI to change the timer recording tape speed automatically to
	the LP mode when the remaining tape length becomes shorter
	than the recording time. Note that for VITESSE AUTO. to
	work correctly, the DUREE CASSETTE setting must be
	accurate.
	• NON to keep the set tape speed.

DUREE CASSETTE	• E180 to use an E-180 or shorter type tape.
	• E195 to use an E-195 type tape.
	• E240 to use an E-240 type tape.
	• E300 to use an E-300 type tape.

		continued

Changing menu options

67

Image 67

Sony SLV-SE250B Changing menu options, PressOK. MENU, then select Options and press, Menu option Set this option to

Contents

Video Cassette Recorder Compatible colour systems PrecautionsSafety Installing Table of contents Check your model name Unpacking You can use this remote Setting up the remote commanderUsing the remote commander Inserting the batteries TV control buttons Getting Started If your TV does not have a Peritel connector Connecting the VCR To mains Aerial cable supplied If your TV has a Peritel connectorPeritel cable not supplied Signal flow Mains lead LIGNE-1 If the connected TV complies with About the Smartlink features Press Regl Canal TV system appears in the display window Tuning your TV to the VCRPress ?/1 MARCHE/VEILLE to turn on the VCR Press Regl Canal on the VCR lightly VCR below Reglage Auto Press Regl Canal To check to see if the TV tuning is correctTo obtain a clear picture from the VCR Reglage Auto Regl Canal To cancel the Auto Set Up function Setting up the VCR with the Auto Set Up functionPress Reglage Auto Press M/m to highlight LANGUE, then Press OK Selecting a languageBefore you start… Turn on the VCR and the TV Set the TV to the video channel Press Menu to exit the menu Press M/ m to highlight the desired language, then press OKTip Presetting channels CHAINES, then press OK Press M/m to highlight Reglage DESCABLE, then press OK CANAL, then press OK Chaine Press Chaine +/- to selectProgramme position Press M/m to highlight Reglage If the picture is not clear Channel system for the French Catv network Tuning the French Catv channels Press M/m to highlight Liste DES CHAINES, then press OK Changing/disabling programme positionsChanging programme positions Press MENU, then press M/m to highlight Listes and press OK Getting Press MENU, then press M/m to highlight LISTES, and press OK Disabling unwanted programme positions Selected row will be cleared as shown Press ANNUL/0 Press M/ m to highlight the row which you Want to disableOn the right Changing the station names Press Setting the clock manually Setting the clockPress M/m to highlight HORLOGE, then press OK Press , to highlight the month and set MANUEL, then press OKMonth pressing M/m Tips Reglage Auto is highlighted Changing the station for the Auto Clock Set function Press m to highlight Chaine ’HORLOGE, then press OK Press M/m to highlight OUI, then press OK Connecting a decoder Setting the Canal Plus decoder Press M/m to highlight OPTIONS-2, then press OK Setting the Canal Plus channelPress M/m to highlight DECODEUR/ LIGNE2, then press OK Press M/m to highlight NORME, then press OK Press M/m to highlight DECODEUR, then press OKMenu disappears from the TV screen Press M/m to highlight Reglage DES CHAINES, then press OK Reglage DES Chaines Chaine Press Chaine +/- to select the desired CANAL+, then press OK Then press OK Stop m RET Playing a tape To use the time counter Additional tasksTo play an NTSC-recorded tape To set the colour system Lecture ENR Stop Recording TV programmes To watch another TV programme while recording To stop recordingPress x Stop To check the remaining time To save a recording Safety tab Tips Recording what you are watching on the TV TV Direct Rec Before you start Recording TV programmes using the Dial Timer Turn Prog to set the recording date To stop the VCR while recording, press x Stop To return to the previous step To set the clock To use the VCR after setting the timer To activate the Demonstration Mode About the Demonstration ModeTo cancel the Demonstration Mode Recording TV programmes using the ShowView system Position or station name, tape speed*, VPS/PDC setting appear on the TV screenPress Minuterie Press OK Date, start and stop times, programme Want to change Press M/m to reset itTimer recording with VPS/PDC signals Press / , to highlight the item you To record satellite broadcasts Setting the timer manually Normale Showview Selectionner Regler Sortie Menu To stop recording Ralenti ×2 Playing/searching at various speedsRET Playback options Operation Playback options Operation To resume normal playback Additional Operations Setting the recording duration timeTo cancel the duration To extend the duration Before you start … Checking/changing/cancelling timer settings When the timer settings overlap Acces Smart Searching using the Acces Smart function To recall the latest data screen after you remove the tape Recording the programme D over the programme a and B Originally recorded programmes Adjusting the tracking Adjusting the pictureAbout the Optimum Picture Control OPC function Tip PressOK. MENU, then select Options and press Changing menu optionsMenu option Set this option to OPTIONS-2 Example a Your VCR Recorder LIGNE-1 TV Other VCR Player How to connect to record on this VCRVMC-2121HG Peritel cable not supplied Signal flow Editing with another VCR Entree LIGNE-2 Other VCR Player Example B Your VCR Recorder Press the x Stop buttons on both VCRs Operation when recording on this VCRBefore you start editing To stop editing Symptom Remedy TroubleshootingClock No TV programme appears Canal PlusOthers Initial Additional InformationContamination Inputs and outputs SpecificationsSupplied accessories System Front panel Index to parts and controlsRefer to the pages indicated in parentheses for details PDC OPC Display window Rear panel Antenne Entree connector 8Mains lead 8 Remote commander Additional Information Index to parts and controls Additional Information Smartlink Index