MENU ENTER

Getting Started

Storing DAB/FM Stations

Automatically (Auto-betical

Select)

With Auto-betical Select you can automatically store up to a combined total of 99 DAB and FM stations. At the same time, stations are stored in alphabetical order for each broadcast band without redundancy. Additionally, Auto-betical Select only stores the stations with the clearest signals. If you want to store DAB, FM or AM (MW and LW) stations one by one, see “Receiving Broadcasts” on page 10 and “Storing Stations Manually” on page 11.

Before you begin, make sure you have:•connected DAB, FM and AM aerials to the tuner as indicated on pages 4 and 5.

POWER

 

 

TUNING/SELECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Tune down the volume on the amplifier, then turn on the amplifier and select the TUNER mode.

2Press POWER to turn on the tuner.3Press MENU.4Turn TUNING/SELECT so that “AUTO- BETICAL Audio Only” appears.5Press ENTER.The tuner scans all the DAB and FM stations in the broadcast area.While scanning, “Now AUTO-BETICAL” appears in the display.

For DAB and FM RDS stations, the tuner first checks for stations broadcasting the same programme, then stores only the one with the clearest signal. The selected DAB and FM RDS stations are sorted alphabetically by their Programme Service name, then assigned a number from 1 for each broadcast band. For more details on DAB and FM RDS, see page 10 (DAB) and 14 (FM RDS) .

Regular FM stations are also assigned preset numbers and stored after the FM RDS stations. You can store up to a combined total of 99 stations in all broadcast band.

When scanning finishes, “AUTO-BETICAL End” flashes in the display.

8GB

zTo change the location of, or erase, a preset station

See “Organizing the Preset Stations” on page 13.

zTo store stations with data broadcasts

Select “AUTO-BETICAL Audio & Data” in step 4 above. While receiving the data broadcast, the data is output only to the DAB RDI OUT connector.

zTo confirm preset stations

1Press DAB, FM or AM whichever you want to confirm.

2Turn TUNING/SELECT.

You can receive the broadcasts of the preset station.

Notes

•DAB stations are sorted by ensemble frequency from low to high. In the ensemble, each service are

arranged by programme service name alphabetically.

•If you move to another area, repeat this procedure to store stations in your new area.

•For details on tuning stored stations, see page 9.

•Each FM station is stored with the following setting:

-ANTENNA ATTENUAT: OFF

-IF BAND WIDTH: WIDE

-FM mode (Auto stereo/Monaural): Auto Stereo

If you want to preset the diffrent setting for each FM station, change settings according to the procedures in “Tips for Better FM Reception” on page 18, then preset stations again.

•If you move the aerial after storing stations using Auto- betical Select, the stored settings may no longer be valid. If this happens, store the stations again.

•There is no sound when you receive DAB data broadcasts.