4:Connecting the AC power cord

Connecting the AC power cord(Models of area code CEL, CEK only)

Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet.

AC power cord (supplied)

 

AC IN terminal

IMPEDANCE SELECTOR

 

8

~ AC IN

4

 

(Models of area code TW (Taiwan) only)

Connect the AC power cord to a wall outlet.

AC power cord*

IMPEDANCE SELECTOR

8

 

4

b

To a wall outlet

*The AC power cord for Taiwan model is non- detachable.

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults. Use the buttons on the receiver for the operation.

1 Press ?/1 to turn off the receiver.2 Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the display alternatingly.

3 Press MEMORY/ENTER.

“CLEARING” appears in the display for a while, then “CLEARED” appears.

The following are reset to their factory settings.

•All settings in the SPEAKER SETUP, LEVEL, EQUALIZER, CUSTOMIZE and TUNER menus.

•The sound field memorized for each input and preset station.

•All sound field parameters.

•All preset stations.

•All index names for inputs and preset stations.

•MASTER VOLUME –/+ is set to “–oodB” (volume minimum).

•INPUT SELECTOR is set to “DVD”.

16GB