For advanced LEVEL menu adjustments

Set “MENU XXX” in the CUSTOMIZE menu to “MENU EXP.” (page 40). This enables advanced setups including those of phase noise, phase audio and dynamic range compressor. For details on how to set the items, see page 43.

Resetting sound fields to the initial settings

Use the buttons on the receiver for the operation.

1 Press ?/1 to turn off the power.2 While holding down 2CH, press ?/1.

“SF. CLR.” appears in the display and all sound fields are reset to the initial setting.

Adjusting the equalizer

You can adjust the tonal quality (bass, treble level) of the front speakers using the EQUALIZER menu.

1 Start playing a source encoded with multi channel surround effects (DVD, etc.).

2 Press MAIN MENU repeatedly to select “E Q”.

3 Turn MENU to select the parameter you want to adjust.

For details, see “EQUALIZER menu parameters” below.

4 While monitoring the sound, turn –/+ to select the setting you want.

The setting is entered automatically.

5 Repeat steps 3 and 4 to adjust the other items.

Note

You cannot adjust the equalizer when the receiver is decoding signals with a sampling frequency of more than 48 kHz, or when DTS 96/24, DTS-ES Matrix or DTS Neo:6 decoding is applied.

EQUALIZER menu parametersxEQ XXX (Equalizer on/off)

Initial setting: OFF

Select “ON” to activate the equalizer.

Note

The “EQ” indicator lights up in the display when the equalizer is turned on. When you adjust the equalizer using the EQUALIZER menu parameters, the settings are applied to all sound fields and can be reproduced whenever you turn on the equalizer.

x L R BASS XXX dB (Front speaker bass level)x L R TREB. XXX dB (Front speaker treble level)

Initial setting: 0 dB

You can adjust from –10 dB to +10 dB in 1 dB steps.

Settings and Adjustments Advanced

39GB