Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with INPUT SELECTOR, and display it in the receiver’s display.

Use the buttons on the receiver for the operation.

1 To index a preset station

Turn INPUT SELECTOR to select the FM or AM band, then tune in the preset station you want to create an index name for (page 25). Then, press MAIN MENU repeatedly to select “TUNER”.

To index an input

Turn INPUT SELECTOR to select the input you want to create an index name for. Then, press MAIN MENU repeatedly to select “CUSTOM”.

2 Turn MENU to select “NAME IN”.

3 Press MEMORY/ENTER.

The cursor flashes and you can select a character.

4 Use MENU and –/+ to create an index name.

Turn –/+ to select a character, then turn MENU to move the cursor to the next position.

Tips

•You can select the character type as follows by turning –/+.

Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, turn –/+ until a blank space appears in the display.

•If you made a mistake, turn MENU until the character you want to change flashes, then turn –/+ to select the correct character.

5 Press MEMORY/ENTER to store the index name.

Note (Models of area code CEL, CEK only)

When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.)

44GB