Presetting radio stations

You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to.

Presetting radio stations

1 Turn INPUT SELECTOR to select FM or AM band.

The last received station is tuned in.

2 Tune in the station that you want to preset using automatic tuning (page 23) or direct tuning (page 24).

3 Press MEMORY/ENTER.

“MEMORY” indicator lights up in the display for a few seconds. Do steps 4 to 5 before the indication turns off.

4 Press PRESET TUNING + or PRESET TUNING – repeatedly to select a preset station number.

Each time you press the button, you can select the preset station number as follows:

tA1yA2y...yA0yB1yB2y...yB0T

tC0y...yC2yC1T

If “MEMORY” indication turns off before you select the preset station number, start again from step 3.

Tip

You can also use the remote to select a preset station number. Press SHIFT repeatedly to select a memory page (A, B or C) and then press the numeric buttons to select a preset number.

5 Press MEMORY/ENTER again.

The station is stored to the selected preset number.

If “MEMORY” indication turns off before you press MEMORY/ENTER, start again from step 3.

6 Repeat steps 2 to 5 to preset another station.
Tuning to preset stations

1 Turn INPUT SELECTOR to select FM or AM band.

The last received station is tuned in.

2 Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want.

Each time you press the button, you can select the preset station as follows:

tA1yA2y...yA0yB1yB2y...yB0T

tC0y...yC2yC1T

Using the remote

1Press TUNER repeatedly to select FM or AM band.

2Press PRESET/CH/D.SKIP +/– repeatedly to select the preset station you want.

To select the preset station directlyPress the numeric buttons on the remote.

The preset station of the selected number in the current memory page is tuned in. Press SHIFT repeatedly on the remote to change the memory page.

Operation Amplifier

25GB