Multi channel surround setup (continued)
xSub woofer selection (SUB WOOFER)
• If you connect a sub woofer, select “YES”.
•If you do not connect a sub woofer, select “NO”. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.
•In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer’s cut off frequency as high as possible.
Advance Settings
The parameters below are for the advanced speaker settings. They appear in the display window only when you set “MENU EXPAND” to “ON” in the CUSTOMIZE menu (page 44).
xSurround speaker position (SURR POSI.)*
This parameter lets you specify the location of your surround speakers for proper implementation of the Digital Cinema Sound surround modes. Refer to the illustration below.
•Select “SIDE” if the location of your surround speakers corresponds to section A.
•Select “MIDDLE” if the location of your surround speakers corresponds to section B.
•Select “BEHIND” if the location of your surround speakers corresponds to section C. This parameter is available only when the surround back speaker size is set to “NO”.
| 90° |
|
A | 60° | A |
B | 30° | B |
C | C |
|
| 20° |
|
xSurround speaker height (SURR HEIGHT)*/Surround back speaker height (SURR BACK HGT.)**
This parameter lets you specify the height of your surround and surround back speaker(s) for proper implementation of the Digital Cinema Sound surround modes. Refer to the illustration below.
•Select “LOW” if the location of your surround speakers corresponds to section A.
•Select “HIGH” if the location of your surround speakers corresponds to section B.
B 
B
60
A A 30
*These parameters are not available when “Surround speaker size (SURROUND)” is set to “NO”.
**This parameter is not available when “Surround back speaker size (SURR BACK)” is set to “NO”.