Press PAUSE on the recorder component.
The source component is released from the pause mode, and recording begins shortly thereafter.
When playback ends from the source component, recording stops.

Jacks and connection examples

CONTROL A1

CONTROL A1

CD player

MD deck

On CONTROL A1 jacks and connections

It is possible to make connections between CONTROL A1 and CONTROL A1 jacks. For details regarding particular connections or set up options, refer to the operating instructions supplied with the component(s).

About the connecting cord

Some CONTROL A1 compatible components are supplied with a connecting cord as an accessory. In this case, use the connecting cord for your connection.

When using a commercially available cord, use a monaural mini-plug cord less than 2 meters long, with no resistance (such as the Sony RK-G69HG).

Notes

You must connect a CONTROL A1 compatible amplifier (receiver) using a monaural mini-plug cord in order to take advantage of the automatic function selection feature.

This function only works when the components are connected to the amplifier (or receiver) inputs according to the names on the function buttons. Certain receivers allow you to switch the names of the function buttons. In this case, refer to the operating instructions supplied with the receiver.

When recording, do not play any components other than the recording source. It will cause the automatic function selection to operate.

Synchronized recording

This function lets you conduct synchronized recording between the selected source and recorder components.

1 Set the function selector on the amplifier (or receiver) to the source component.

2 Set the source component to pause mode (make sure both the N and X indicators light together).

3 Set the recorder component to the REC-PAUSE mode.

4

Operations Other

Basic Functions

The CONTROL A1 functions will operate as long as the component you want to operate is turned on, even if all of the other connected components are not turned on.

Automatic function selection

When you connect a CONTROL A1 compatible Sony amplifier (or receiver) to other Sony components using monaural mini- plug cords, the function selector on the amplifier (or receiver) automatically switches to the correct input when you press the play button on one of the connected components.

Notes

Do not set more than one component to the pause mode.

Certain recorder components may be equipped with a special synchronized recording function that uses the CONTROL A1 Control System, such as “CD Synchro Dubbing”. In this case, refer to the operating instructions supplied with the recorder component.

47US