Listening to the sound in

another room

(STR-DE985 only)

g

2ND ROOM OUT

AUDIO IN

Stereo amplifier

SPEAKERS

Press 2ND ROOM repeatedly to select the analog audio signals for output to a stereo amplifier in another room. For details on the connection, see page 15.

Each time you press the button, the audio source changes cyclically as follows:

SOURCE*1 t TAPE t MD/DAT t CD/SACD t TUNER

*1 The audio signals of the current function is output.

Even if 2ND ROOM is set to “SOURCE”, the sound from front speakers is not output when MULTI/2CH ANALOG DIRECT is set to MULTI CH 1 or 2 DIRECT.

Only signals from components connected to the analog input jacks are output through the 2ND ROOM OUT jacks. No signals are output from components connected to only the digital input jacks.

Changing the display

DISPLAY

Each time you press DISPLAY, the display changes cyclically as follows:

Index name of the component* t Selected component t Sound field applied to the program source

When the tuner is selected

Index name of the preset station* t Frequency t Sound field applied to the band or the preset station

*Index name appears only when you have assigned one to the component or preset station (page 42). Index name does not appear when only blank spaces have been entered, or it is the same as the function.

DIMMER

Press DIMMER repeatedly to adjust the brightness of the display (5 steps).

When set to the dimmest setting, the display and the blue LED are turned off. However, when you press any button, the display becomes the brightest setting temporary.

28US