Specifications (continued)
Harmonic distortion at 1 kHz
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section
Tuning range
Models of area code U, CA
With
With | 531 – 1710 kHz6) |
Antenna | Loop antenna |
Intermediate frequency | |
| 450 kHz |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion | 0.5 % (50 mV/m, |
| 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs |
|
Video: | 1 |
Y: 1 | |
| C: 0.286 |
Component Video: | Y: 1 |
| PB |
| 75 ohms |
| PR |
| 75 ohms |
Outputs |
|
Video: | 1 |
Y: 1 | |
| C: 0.286 |
Component Video: | Y: 1 |
| PB |
| 75 ohms |
| PR |
| 75 ohms |
General
Power requirements
Area code | Power requirements |
U, CA | 120 V AC, 60 Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
U | |
| |
|
|
CA | |
| |
|
|
Power consumption (during standby mode)
0.5W (when “POWER SAVE” in the CUSTOMIZE menu is set to “ON”) (page 44).
AC outlets | 2 switched, 120 W/1A |
| MAX |
Dimensions | 430 ⋅ 157.5 ⋅ 369 mm |
| (16 7/8 ⋅ 6 2/8 ⋅ 14 4/8 |
| inches) |
| including projecting parts |
| and controls |
Mass (Approx.) | 9.5 kg (20 lb 16 oz) |
Supplied accessories |
|
FM wire antenna (1) |
|
AM loop antenna (1) |
|
Remote commander (1) |
|
•
•
Audio/video/control S cord
For details on the area code of the component you are using, see page 4.
Design and specifications are subject to change without notice.