Searching for a scene by specifying a time
— Time search feature

You can specify the time count of a scene to move it.

Number buttons

(used when ALT is lit).

12/ENTER (used when ALT is lit).

ALT CLEAR

1 During playback or when playback is paused, press the ALT button so that it lights, and then press the orange ENTER button.

A dialog box allowing you to specify the time count appears on the display.

2 Press the number buttons to enter the time.

For example, to move to the scene at time count 1 hour 30 minutes, enter -13-.

3 Press the orange ENTER button.

Playback starts at the input time count.

Tip

If you enter the wrong time count by mistake, press the ALT button so that it lights, and then press the CLEAR button to delete the time count you entered.

Starting playback from the point where you stopped playback

— Resume feature

You can start playback from the point where you last stopped playback.

/

SELECT

1 On the video capsules screen, select a video capsule that you want to watch, and then press the SELECT button.

A submenu appears.

2 Use / to select Resume, and then press the SELECT button.

Playback starts from the point where you last stopped.

Tip

The resume feature remembers position where playback stopped for the five video capsules watched most recently. If you watch more than five video capsules, the resume feature information of the least recent video capsule is lost and you can no longer use this feature with that video capsule until you watch it again.

62GB