Install the TV3 Attach the TV to the TV Stand.
1 Prepare for the installation of the TV.

1Hold the TV as illustrated below, and insert the four hooks on the rear of the TV into the top portion of the holes of the centre pillar. Check that all four hooks are firmly secured in the four holes.

Detach the Table-Top Stand (if attached) and remove the two screws from the rear of the TV. For details, refer to the leaflet supplied with the TV.

2 Attach the four hooks on the rear of the TV.

Place the TV with its screen facing down on a stable cloth-covered work surface.

Attach the four hooks with the four hook screws.

Hook screw

Hook

Soft cloth

Align the hook with the circle on the rear of the TV.

Notes

•When using an electric screwdriver, set the torque setting to approximately 2 N·m {20 Kgf·cm}.

•Be sure not to use any screws other than the supplied ones (+PSW5 × L16) when attaching the hooks.

Note

Be careful not to topple the TV Stand when attaching the TV to the TV Stand.

2Push the TV straight down to securely seat the hooks into the TV Stand as shown.

Notes

•Confirm the hooks are firmly seated into the bottom of the holes, then check that the TV hangs parallel level.

•Be careful not to move the TV Stand while attaching the TV.

7 (GB)