iOUTPUT (audio output) connector
Connect one end of the supplied
Note
To prevent damaging the tuner, do not apply power voltage to this connector through the connection to external devices.
Diversity tuner module
aSET button
Press to change and enter display parameters.
For details, see “Tuner Settings” on page 42.
bRF (radio frequency) indicator The color indicates the strength of the RF
input signal.
On (green): RF input is 25 dBµ1) or more.
Off: RF input is less than 25 dBµ1).
1) 0 dBµ = 1 µVEMF
cDisplay section
The channel indication (C) for U30 model is shown.
ARF (radio frequency) indications The number of dots indicates the RF input level.
BAF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.
CGP (group)/CH (channel) indication Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows.
For details, see“Tuner Settings” on page 42.
Reception |
| |
channel group | Press | |
and number | ||
the | ||
| ||
Reception | SET | |
button. | ||
frequency |
|
The channel/frequency indications for U30 model are shown.
d+ (+ selection) / – (– selection/reset) buttons
Press these buttons to set the reception channel and frequency.
Parts Identification | 33 |
|
|