| BATT | Battery status |
| indication |
|
3 | Lights | Less than 20% |
|
| charged |
|
|
|
4 | Flashes | Almost drained |
|
|
|
Note
The indicated battery condition may not be correct if the batteries were not new when installed. If you plan to use the component for a long period, it is recommended that you replace the batteries with brand new ones.
Notes on battery
Batteries may leak or explode if mistreated. Be sure to follow these instructions.
•Be sure to install the batteries with the correct polarity.
•Always replace the two batteries together.
•Do not use different types of batteries or old and new one together.
•The batteries are not rechargeable.
•When not using the component for a long period of time, remove the batteries to avoid leakage. If the batteries do leak, clean all leakage from the battery compartment and the component. Leakage left in the compartment and the component may cause poor battery contact. If there seems to be poor battery contact, consult your Sony dealer.
Attachment and
Installation
Procedures
This section describes the procedures for attaching the supplied accessories to the components and the installation of the diversity tuner module
Attaching the supplied accessories to the body- pack transmitter
To attach the microphone
Microphone (supplied)
For a secure connection, be sure to turn and lock the connector cover.
Note
Be sure to attach or remove the microphone after turning off the transmitter.
36 Attachment and Installation Procedures