Sony V2, V6 manual 55

Symptom	Meanings	Remedy
There is	The attenuation level of the	The input level of the tuner is
distortion in	transmitter is too low.	extremely high. Press the – button on
the sound.		the transmitter in attenuation level
		setting mode to raise the attenuation
		level.
	The transmitter and the tuner	Set the transmitter to the same
	are set to different channels.	channel.
	Headphones with a monaural	Use the headphones with a stereo
	mini jack is used.3)	mini jack.
There is sound	The transmitter and the tuner	Set the transmitter to the same
interruption or	are set to different channels.	channel as the tuner.
noise.
	Two or more transmitters are	Set each transmitter to a different
	set to the same channel.	channel.
	The transmitters are not set to	The channel plan which the UWP
	the channels within the	series components use is set so that
	same channel group.	no signal interference occurs when 2
		or more transmitters are used
		simultaneously. Set each transmitter
		to a different channel within the
		same channel group.
	Two or more UWP series	• Select a channel from the channel
	packages are operated at close	group 01 to 09.
	channels.	• Use the channels at least 2-
		channel intervals (250 kHz).
The RF	Jamming radio waves are being	Determine which channels are
indications on	received.	usable (i.e., channels for which the
the tuner		RF indications on the tuner do not
appear (the		appear (or for which the RF indicator
RF indicator		on the tuner does not light up)) and
lights up) even		set the tuner and transmitter to the
when the		same usable channel. When two or
transmitter is		more transmitters are used
off.		simultaneously, use another channel
		group that is unaffected by jamming
		radio waves.

1)Body-pack transmitter (UTX-B2)/hand-held microphone (UTX-H2)/plug-on transmitter (UTX-P1)/ portable diversity tuner (URX-P2) only

2)Body-pack transmitter (UTX-B2) only

3)Portable diversity tuner (URX-P2) only

Troubleshooting 55