To connect an IBM PC/AT compatible computer

Left side

 

 

 

INPUT A MENU

Computer

 

SAVING

 

PRO

PUSH

to monitor output

ENTER

 

 

VIDEO S VIDEO

 

ACCESS

TEMP/FAN

 

 

LAMP/COVER

 

 

HD D-sub 15-pin cable

 

 

(supplied)

 

 

Stereo audio connecting cable (not supplied)a)

to audio output

USB cable (supplied only VPL-CS6/CX6)

(Connect the USB cable to use a wireless mouse or the Projector Station.)

to USB connector

a) Use a no-resistance cable.

On the USB function

When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically.

1USB hub (general use) (VPL-CX6 only)2USB human interface device (wireless mouse function)3USB human interface device (projector control function) (VPL-CX6 only)Recommended operating environment

When you use the USB function, connect the USB cable as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE, Windows ME, Windows 2000 or Windows XP preinstall models.

Notes

•Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable.

•This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer.

•An optional Remote Commander and USB cable are required when controlling the mouse of the computer from the VPL-EX1.

•Operations are not guaranteed for all the recommended computer environments.

Projecting and Up Setting

Connecting the Projector 19 GB