To Use the security lock

1 Press the MENU key and then, in the INSTALL SETTING menu, turn on the “Security Lock” setting.

2 Enter the password.

Use the MENU, M/m/</,, and ENTER keys to enter the four-digit password. (The default initial password setting is “ENTER, ENTER, ENTER, ENTER”. After this is entered you can put in your own password. Therefore when you use this function for the first time, please input “ENTER” four times.)

Enter password key.

Password required for power-on.

Use:

Cancel: Other key

Next, the screen for entering the new password is displayed. (Enter the password at this screen even if you want to keep the current password.)

Enter new password key.

Power-on cannot be performed without the password.

Use:

Cancel: Other key

3 Enter the password again to confirm.

Re-enter new password key.

Be sure to remember this password.

Use:

Cancel: Other key

If the password is entered incorrectly, the menu screen displays an “Invalid Password” message.

INSTALL SETTING

X Input A

Tilt ...

 

V Keystone:

Auto ...

Imag e Flip:

Off

Background:

Blue

Lamp Mode:

Standard

High Altitude Mode: Off

Securit y Lock:

Off

Invalid Password!

Projecting and Up Setting

Projecting 27 GB