LCD / VGA ,

Projecting

5

Rear remote control detector

 

 

TILT

6

 

ON/STANDBY

 

 

7

2

indicators

4

FREEZE MS SLIDE I / 1

KEYSTONE

INPUTAPA

MENU PIC ENTER

MUTING

For VPL-CS6/CX6

For VPL-EX1

1 Open the connector panel, plug the AC power cord into a wall outlet, then connect all equipment.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

2 Press the I / 1 key.

The ON/STANDBY indicator lights in green and the Intelligent Auto-setup starts. The lens protector opens, and the powered tilt adjuster rises and stops at the previously adjusted position.

Note

When the projector is turned on, the Startup screen is projected (VPL-CX6 only).

For details on the Startup screen, see the attached "Operating Instructions for Memory Stick".

3 Turn on the equipment connected to the projector.

Depending on the type of your computer, for example a notebook, or an all-in- one LCD type, you may have to switch the computer to output to the projector

by pressing certain keys (e.g., / , etc.), or by changing your computer’s settings.

GB 24 Projecting