Before using the RemoteCommander

Pull out the clear film from the lithium battery holder.

To replace battery

1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.

2 Install the lithium battery.

+side facing upward

3 Put the lithium battery holder back into the Remote Commander.Notes on the lithium battery

•Keep the lithium battery out of the reach of children.

•Should the battery be swallowed, immediately consult a doctor.

Notes on Remote Commander operation

•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the front or rear remote control detector.

•The operation range is limited. The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the commander can control the projector becomes.

GB 16 Location and Function of Controls