Location and Function of ControlsTop/Front/Left Side

TILT

Rear/Right Side/Bottom1I / 1 (on/standby) key

Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the I / 1 key lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about two seconds.

For details on steps for turning off the power, see “To turn off the power” on page 29.

2ON/STANDBY indicator (located around the I / 1 key)

Lights up or flashes under the following conditions:

–Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key.

–Lights in green when the power is turned on.

–Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after the power is turned off.

The ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you cannot light up the ON/STANDBY indicator with the I / 1 key.

For details on the LAMP/COVER and the TEMP/FAN indicators, see on page 46.

3TILT adjustment key

For details, see“How to use the powered tilt adjuster” on page 11.

4INPUT key

Selects the input signal. Each time you press the key, the input signal switches as follows:

INPUT A t MS t VIDEO t S VIDEO

t

(VPL-CX6

 

 

only)

5Lens protector (lens cover)

The lens protector automatically opens when the power is turned on.

6Front remote control detector7 Ventilation holes (exhaust)

GB 10 Location and Function of Controls