4 Insert the new lamp all the way in untilit is securely in place. Tighten the screws. Fold the handle.
Disposal of the used lamp

As the used lamp contains Mercury, dispose of the lamp according to local, state or federal laws.

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

Cleaning the Air Filter

The air filter should be cleaned every 300 hours.

Remove dust from the outside of the ventilation holes with a vacuum cleaner.

Notes

•Be careful not to touch the glass surface of the lamp.

•The power will not turn on if the lamp is not secured properly.

5 Close the lamp cover and tighten the screws.6 Turn the projector back over.

7 Connect the power cord. The ON/ STANDBY indicator around the =/1 key lights in red.

8 Press the following keys on the remote commander in the following order for less than five seconds each: RESET, <, ,, ENTER.

Notes

•Be sure to use the LMP-C150 Projector Lamp for replacement. If you use lamps other than LMP-C150, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.

When it becomes difficult to remove the dust from the filter with a vacuum cleaner, remove the air filter and wash it.

1 Turn off the power and unplug the power cord.

2 Place a protective sheet (cloth) beneath the projector and turn the projector over.

3 Remove the air filter cover.

GB 42 Maintenance