Sony VPL-CS6 2 Replace the lid, I, 3MENU key, 7INPUT key, For VPL-EX1, 6FREEZE key, q; RESET key, 4D ZOOM +/– key, 9D KEYSTONE key, To install batteries

To install batteries

1 Push and slide to open the lid, then install the two size AA (R6) batteries (supplied) with the correct polarity.

While pressing the lid, slide it.

Be sure to install the battery from the # side.

2 Replace the lid.For VPL-EX1

1I / 1 (on/standby) key

2ENTER/arrow key (M/m/</,)

Press the center of the key to use

ENTER.

3MENU key

4D ZOOM +/– key

Enlarges the image at a desired location on the screen.

+: Pressing the + key once displays the

icon. This icon indicates the point you
want to enlarge. Use an arrow key (M/	Overview
m/</,) to move the icon to the
point to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
–: Pressing the – key reduces an image
that has been enlarged with the D
ZOOM + key.

5Infrared transmitter6FREEZE key

Used to freeze the picture projected. To cancel the freeze function, press the key again.

7INPUT key8APA (Auto Pixel Alignment) key

Adjusts a picture clearest automatically while a signal is input from a computer. Used when “Smart APA” in the SET SETTING menu is set to “Off.” Normally set to “On.”

9D KEYSTONE key

Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow key (M/m/</,) for the adjustment.

q; RESET key

Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen.

Location and Function of Controls 15 GB