Note

The projection size that can be adjusted with the automatic focus adjustment is from 40-inch up to 150-inch. However, it may not be perfectly adjusted depending on the brightness of the room, or the state of the screen. In this case, adjust it manually in step 8 on page 13.

3 Turn on the equipment connected to the projector.

4 Press the INPUT key to select the input source.

Each time you press the key, the input signal switches as follows:

Input-A t Video t S-Video

To input fromPress INPUT

 

to display

 

 

Computer connected to

Input-A

the INPUT A connector

 

 

 

Video equipment

Video

connected to the

 

AUDIO/VIDEO input

 

connector

 

 

 

Video equipment

S-Video

connected to the

 

AUDIO/S-Video input

 

connector

 

 

 

Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.

Notes

•If “Auto Input Search” is set to “On,” the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.

For details, see “Auto Input Search” on page 25.

•The Smart APA feature is effective for the input signal from a computer only.

5 Switch the equipment connected to output to the projector.

Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., , etc.), or by changing your computer’s settings.

or

and

Note

The key used for switching the computer to output to the projector varies depending on the type of computer.

6 Adjust the upper or lower position of the picture.

To adjust using the RemoteCommander

Press the TILT/KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the v/V/ b/B keys.

To adjust using the control panel on the left side of the projector

Press v or V of the TILT key to adjust the tilt of the projector.

12 Projecting