Specifications

Optical characteristics

Projection system

 

3 LCD panels, 1 lens, projection

 

system

LCD panel

VPL-CX20: 0.63-inch XGA

 

panel, approximately 2,360,000

 

pixels (786,432 pixels ⋅ 3)

 

VPL-CS20: 0.63-inch SVGA

 

panel, approximately 1,440,000

 

pixels (480,000 pixels ⋅ 3)

Lens

1.2 times zoom lens (powered)

 

f 18.8 to 22.6 mm/F1.6 to 1.94

Lamp

165 W UHP

Projected picture size

 

40 to 150 inches (measured

 

diagonally)

Light output

ANSI lumen1) 2000 lm

(When the Lamp Mode is set to “High.”)

Throwing distance (When placed on the floor.) 40-inch: 1.2 to 1.4 m

(3.8 to 4.6 feet)

80-inch: 2.3 to 2.8 m

(7.6 to 9.4 feet)

100-inch: 2.9 to 3.6 m

(9.6 to 11.7 feet)

150-inch: 4.4 to 5.4 m

(14.4 to 17.6 feet)

There may be a slight difference between the actual value and the design value shown above.

1)ANSI lumen is a measuring method described in American National Standard IT 7.228.

Electrical characteristics

Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N/ PAL60 system, switched automatically/manually

(NTSC4.43 is the color system used when playing back a video recorded in NTSC on a NTSC4.43 system VCR.)

Resolution VPL-CX20: 750 horizontal TV lines (Video input)

1,024 ⋅ 768 dots (RGB input) VPL-CS20: 600 horizontal TV

lines (Video input)

800 ⋅ 600 dots (RGB input)

Acceptable computer signals1) fH: 19 to 92 kHz

fV: 48 to 92 Hz

(Maximum input signal resolution: SXGA+ 1400 ⋅ 1050

fV: 60 Hz

1)Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector.

Applicable video signals

15 k RGB/Component 50/60 Hz, Progressive component 50/60 Hz, DTV (480/60I, 575/50I, 480/60P, 575/50P, 720/60P, 720/ 50P, 1080/60I, 1080/50I), Composite video, Y/C video

Speaker Monaural speaker system, 40 ⋅ 20 mm (1 5/8 ⋅ 13/16 inches)

Speaker output

1 W (max.)

Input/Output

INPUT A HD D-sub15-pin (female) Analog RGB/component:

R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated)

G:0.7 Vp-p ±2 dB

(75 ohms terminated)

G with sync/Y: 1 Vp-p ±2 dB sync negative

(75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated)

SYNC/HD: Composite sync input: TTL level, positive/negative Horizontal sync input: TTL level

Positive/negative VD: Vertical sync input: TTL level, positive/ negative

AUDIO/VIDEO

VIDEO: Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated)

S VIDEO: Y/C (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated)

C (chrominance): burst

0.286 Vp-p ±2 dB (NTSC)

(75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated)

AUDIO: rated input 500 mVrms, input impedance 47 kilohms

Safety regulations

UL60950, cUL (CSA No. 60950), FCC Class B, IC Class B, NEMKO (EN60950), CE (LVD, EMC), C-Tick

40 Specifications