3 Enter the password again to confirm.

When the following message is displayed, the setting for security lock is completed.

Picture

Smart APA:

On

Auto Input Search:

On

 

Signal

Auto Focus:

On

Test Pattern:

Off

 

Function

Standby Mode:

Standard

 

Power Saving:

Off

Installation

Panel Key Lock:

Off

 

Security Lock:

On

Setup

Information

Sel: Set: Back: Exit:

Security Lock enabled!

If “Invalid Password!” is displayed on the menu screen, perform this procedure again from step 1.

Picture

Smart APA:

On

Auto Input Search:

On

 

Signal

Auto Focus:

On

Test Pattern:

Off

 

Function

Standby Mode:

Standard

 

Power Saving:

Off

Installation

Panel Key Lock:

Off

 

Security Lock:

Off

Setup

Information

Sel: Set: Back: Exit:

Invalid Password!

4 Turn the main power off and disconnect the AC power cord.

The security lock is set to on, then it becomes effective. The screen used for

entering the password is displayed when the power is turned on the next time.

Security certification

When the password screen is displayed, enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. In this case, press the ?/1 key to turn off the power.

To cancel the security lock

1 Press the MENU key, then turn off the “Security Lock” setting on the Function menu.

2 Enter the password.

Enter the password that was set.

Note

If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector’s serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password.

Functions Convenient

Security Lock 17