Connecting the

Projector

When you connect the projector, make sure to:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out by the plug, not the cable itself.

Connecting a Computer

This section describes how to connect the projector to a computer.

For more information, refer to the computer’s instruction manual.

To connect a computer

Left side

White

Red

to monitor

to audio

to audio

output

output

output

(L)

(R)

 

Computer

Picture the Projecting

AHD D-sub 15-pin cable (supplied) B A/V connecting adaptor (supplied)

C Audio cable (not supplied) (Connect only when you want to output the audio from the speaker of the projector.)

Notes

•The projector accepts VGA, SVGA, XGA, SXGA, and SXGA+ signals. However, we recommend that you set the output mode of your computer to XGA (VPL-CX20) or

Connecting the Projector

9