Sony VPL-CX20 The Installation Menu, High:, Rear:, Front:, Standard:, Front & Rear:

The Installation Menu

The Installation menu is used for changing the settings of the projector.

Picture	Tilt
	V Keystone:	Auto
Signal	Background:	Blue
	Lamp Mode:	Standard
Function	Lens Control:	On
	IR Receiver:	Front & Rear
Installation	Illumination:	On
	High Altitude Mode:	Off

Setup

Information

Sel: Set: Exit:

Setting items	Functions	Initial setting
Tilt...	Adjusts the position (height) of the projected picture.
V Keystone	Corrects the trapezoidal distortion caused by the projection	Auto
	angle. Select “Auto” for automatic correction, or “Manual”
	for manual correction using the v/V/b/B keys on the
	Remote Commander.
	When the bottom of the trapezoid is longer than the top
	: Sets a lower value.
	When the top of the trapezoid is longer than the bottom
	: Sets a higher value.
Background	Selects the background color of the screen when no signal	Blue
	is input to the projector. Select “Black” or “Blue.”
	Normally, set to “Blue.”
Lamp Mode	Sets the lamp brightness used during the projection.	Standard
	• High: Illuminates the projected image brightly.
	• Standard: Reduces fan noise and power consumption.
	The brightness of the projected image will be lower
	compared with the “High” setting.
Lens Control	When set to “Off,” the LENS (FOCUS, ZOOM) key on the	On
	Remote Commander, and the FOCUS and ZOOM keys on
	the projector do not function.
IR Receiver	Selects the remote control detectors (IR Receiver) on the	Front & Rear
	front and rear of the projector.
	• Front & Rear: Activates both the front and rear
	detectors.
	• Front: Activates the front detector only.
	• Rear: Activates the rear detector only.
Illumination	Selects whether the SONY logo on the rear panel of the	On
	projector lights when the projector is on.
High Altitude	Set to “On” when the projector is used at an altitude of	Off
Mode	1,500 m or higher.

Menu a Using Settings and Adjustments

The Installation Menu 27