Press the LENS key on the Remote

 

Commander to display the Lens Zoom

to raise the projector

menu and adjust the size of the picture

 

using the v/V/b/B keys.

 

To adjust using the control panel on

 

the left side of the projector

 

Press the ZOOM +/– keys on the

 

projector to adjust the size of the picture.

TILT adjustment key

8 Adjust the focus.

to lower the projector

 

To adjust the focus automatically

 

Press the AUTO FOCUS key on the left

 

side of the projector or on the Remote

 

Commander.

 

To adjust the focus manually

 

To adjust the focus using the Remote

 

Commander:

Powered tilt

Press the LENS key on the Remote

Commander to display the Lens Focus

adjuster

menu and adjust the focus using the v/

 

 

V/b/B keys.

 

To adjust using the control panel on

Notes

the left side of the projector:

• When you adjust the powered tilt

Press the FOCUS +/– keys to adjust the

adjuster with the TILT key, the V

focus.

keystone adjustment is performed at the

 

same time. If you do not want to perform

 

the automatic keystone adjustment, set

 

the V Keystone menu to “Manual.” (See

 

page 27.)

 

•If you set the “V Keystone” adjustment to “Auto,” the “V Keystone” correction is automatically adjusted. However, it may not be perfectly adjusted depending on the room temperature or the screen angle. In this case, adjust it manually. Press the TILT/KEYSTONE key on the Remote Commander until “V Keystone” appears on the screen, and adjust the value with the v/V/b/B key. The corrected value is effective until the power is turned off.

•Be careful not to let the projector down on your fingers.

•Do not push hard on the top of the projector with the powered tilt adjuster extended.

It may cause a malfunction.

7 Adjust the size of the picture.

To adjust using the Remote

Commander

Picture the Projecting

Projecting 13