gSpeaker

hRear remote control detector

iVentilation holes (intake)

jAdjusters (hind pad)

Turn the appropriate adjuster to the right or left for minor tilt adjustment of the projected picture.

kVentilation holes (intake)/Lamp cover

lVentilation holes (intake)/Air filter cover

Notes

•Do not place anything near the ventilation holes as this may cause internal heat build-up.

•Do not place your hand near the ventilation holes as this may cause injury.

•To maintain optimal performance, clean the air filter every 1000 hours.

For details, see “Cleaning the Air Filter” on page 38.

mSecurity lock

Connects to an optional security cable (from Kensington).

Web page address: http://www.kensington.com/

nConnector Panel

For details, see “Connector Panel” on page 11.

Control Panel

VPL-CX63

6

– +

– +

7

 

8

9

a?/1 (On/Standby) key

Turns on the projector when it is in standby mode. When you push this key, the ON/STANDBY indicator around the ?/1 key flashes in green until the projector is ready to operate.

bON/STANDBY indicator (located around the ?/1 key)

Lights up or flashes under the following conditions:

–Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key.

–Lights in green when the projector is turned on, and when it is ready to operate.

–Flashes in green from the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key.

10 Location and Function of Controls