Security Lock

The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture.

Enter new password key.

Power-on cannot be performed without the password.

Use:

Cancel: Other key

3 Enter the password again to confirm.

Note

 

 

You will not be able to use the projector if you

 

forget your password and the password

Re-enter new password key.

administrator is not available. Be please aware

 

that using the security lock can prevent valid

 

usage in such cases.

 

 

 

Be sure to remember this password.

To use the security lock

1 Press the MENU key and then, on the INSTALL SETTING menu, turn on the “Security Lock” setting.

2 Enter the password.

Use the MENU, v/V/b/B, and ENTER keys to enter the four-digit password. (The default initial password setting is “ENTER, ENTER, ENTER, ENTER.” After this is entered you can put in your own password. Therefore, when you use this function for the first time, please input “ENTER” four times.)

Use:

Cancel: Other key

When the following message is displayed, the setting for security lock is completed.

Functions Convenient

Enter password key.

Password required for power-on.

Use:

Cancel: Other key

Next, the screen for entering the new password is displayed. (Enter the password on this screen even if you want to keep the current password.)

Enter the password on this screen.

If “Invalid Password!” is displayed on the menu screen, perform this procedure again from step 1.

4 Turn the main power off and disconnect the AC power cord.

Security Lock 21