Sony VPL-CX63 Rear:, Front:, Standard:, Front & Rear:

Setting items	Functions	Initial setting
Standby Mode	You can lower the power consumption in standby	Standard
	mode.
	• Standard: Normally, select this position.
	• Low: Select this position when you want to lower the
	power consumption in standby mode.
Power Saving	When set to “On,” the projector goes into power saving	Off
	mode if no signal is input for 10 minutes. Although the
	lamp goes out, the cooling fan keeps running. The
	power saving mode is canceled when a signal is input
	or any key is pressed. In power saving mode, no keys
	function for the first 45 seconds after the lamp goes
	out.
IR Receiver	Selects the remote control detectors (IR Receiver) on	Front & Rear
	the front and rear of the projector.
	• Front & Rear: Activates both the front and rear
	detectors.
	• Front: Activates the front detector only.
	• Rear: Activates the rear detector only.
Panel Key Lock	Locks all the control panel keys on the rear and side	Off
	panels of the projector so that the projector can be
	operated only with the Remote Commander.
	To lock the control panel keys, set to “On.”
	When it is set to “On,” keeping the ?/1 key on the
	control panel pressed for 10 seconds turns the projector
	on when it is in standby mode, and turns the projector
	to standby mode when the power is on. If you press
	and hold the MENU key for about 10 seconds when
	the power is on, the lock will be released and “Panel
	Key Lock” is automatically set to “Off.”

Notes

•Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.

•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.

•The picture may not be adjusted properly depending on the type of input signal.

•Adjust the “Dot Phase,” “H Size,” and “Shift” items on the INPUT SETTING menu when you adjust the picture manually.

30 The SET SETTING Menu