The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
Setting items | Functions | Initial setting |
|
|
|
V Keystone | Corrects the trapezoidal distortion caused by the projection | Auto |
| angle. Select “Auto” for automatic correction, or |
|
| “Manual” for manual correction using the v/V/b/B keys |
|
| on the Remote Commander. |
|
| When the bottom of the trapezoid is longer than the top |
|
| : Sets a lower value. |
|
| When the top of the trapezoid is longer than the bottom |
|
| : Sets a higher value. |
|
|
|
|
Image Flip | Flips the image on the screen horizontally and/or vertically. | Off |
| • Off: The image does not flip. |
|
| • HV: Flips the image horizontally and vertically. |
|
| • H: Flips the image horizontally. |
|
| • V: Flips the image vertically. |
|
|
|
|
Background | Selects the background color of the screen when no signal | Blue |
| is input to the projector. Select “Black” or “Blue.” |
|
| Normally, set to “Blue.” |
|
|
|
|
Test Pattern | When set to “On,” a test pattern is displayed on the screen | Off |
| during “Lens Zoom” adjustment, “Lens Focus,” or “V |
|
| Keystone.” |
|
|
|
|
Lamp Mode | Sets the lamp brightness used during the projection. | Standard |
| • High: Illuminates the projected image brightly. |
|
| • Standard: Reduces fan noise and power consumption. |
|
| The brightness of the projected image will be lower |
|
| compared with the “High” setting. |
|
|
|
|
Lens Control | When set to “Off,” the LENS (FOCUS, ZOOM) key on the | On |
| Remote Commander, and the FOCUS and ZOOM keys on |
|
| the projector do not function. |
|
|
|
|
Direct Power On | Set to “On” if you are using a circuit breaker to turn the | Off |
| power on/off the entire system. You can turn off the power |
|
| just by unplugging the power cord without pressing the ?/1 |
|
| key. |
|
|
|
|
High Altitude | Set to “On” when the projector is used at an altitude of | Off |
Mode | 1,500 m or higher. |
|
|
|
|
32 The INSTALL SETTING Menu