BOthers
Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel.
Power
Symptom | Cause and Remedy |
|
|
The power is not turned on. | • The power has been turned off and on with the ?/1 key at a short |
| interval. |
| c Wait for about 60 seconds before turning on the power |
| (see page 19). |
| • The lamp cover is not secured. |
| c Close the lamp cover securely (see page 37). |
| • The air filter cover is detached. |
| c Attach the air filter cover securely (see page 38). |
|
|
Both the LAMP/COVER | The electrical system has broken down. |
and TEMP/FAN indicators | c Consult with qualified Sony personnel. |
light up. |
|
|
|
Picture
Symptom | Cause and Remedy |
|
|
No picture. | • A cable is disconnected or the connections are wrong. |
| c Check that the proper connections have been made (see |
| |
| • The connections are wrong. |
| c This projector is compatible with DDC2B (Digital Data |
| Channel 2B). If your computer is compatible with DDC, turn |
| the projector on according to the following procedures. |
| 1 Connect the projector to the computer. |
| 2 Turn the projector on. |
| 3 Start the computer. |
| • Input selection is incorrect. |
| c Select the input source correctly using the INPUT key (see |
| |
| • The picture is muted. |
| c Press the PIC MUTING key to release the picture muting (see |
| |
| • The computer signal is not set to output to an external monitor or |
| set to output both to an external monitor and a LCD monitor of a |
| computer. |
| c Set the computer signal to output only to an external monitor |
| (see page 15). |
|
|
The picture is noisy. | Noise may appear on the background depending on the combination |
| of the number of dots input from the computer and the numbers of |
| pixels on the LCD panel. |
| c Change the desktop pattern on the connected computer. |
|
|
The picture from the | The setting of |
INPUT A connector is | incorrect. |
colored strangely. | c Select “Computer,” “Video GBR” or “Component” correctly |
| according to the input signal (see page 29). |
|
|
|
|
| Troubleshooting |
|
|
Others
39