Control panel

 

 

 

LAMP/ TEMP/

POWER

ON/

5

1

2 3 4

COVER FAN

SAVING

STANDBY

 

 

 

6

 

 

 

 

 

 

 

 

 

INPUT

 

 

7

VOL +

MENU

HELP

 

 

 

 

 

 

 

VOL -

ENTER

RESET

APA

LIGHT

 

 

 

 

 

 

 

 

qa 0 9 8

 

1VOL +/– keys

Adjust the volume of the built-in speakers and output level of the AUDIO jack.

+: Increases the volume.

– :Decreases the volume.

2Arrow keys (M/m/</,)

Used to select the menu or to make various adjustments.

3MENU key

Displays the on-screen menu. Press again to clear the menu.

4HELP key

If you need help information during an operation, press this key to display help messages. The Help menu lists error recoveries depending on problem type.

5Indicators

LAMP/COVER: Lights up or flashes under the following conditions:

•Lights up when the lamp has reached the end of its life or becomes a high temperature.

•Flashes when the lamp cover or air filter cover is not secured firmly.

TEMP (Temperature)/FAN: Lights up or flashes under the following conditions:

•Lights up when temperature inside the projector becomes unusually high.

•Flashes when the fan is broken.

POWER SAVING: Lights up when the projector is in the power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. In the power saving mode, any key does not function for the first 40 seconds. The power saving mode is canceled when a signal is input or any key is pressed.

ON/STANDBY: Lights up or flashes under the following conditions:

•Lights in red when the AC power cord is plugged into the wall outlet. Once in the standby mode, you can turn on the projector

with the I / 1 key.

Location and Function of Controls

•Lights in green when the power is turned on.

•Flashes in green while the cooling fan runs after turning off the power with the I / 1 key. The fan runs for about 120 seconds after turning off the power.

The ON/STANDBY indicator flashes quickly for the first 40 seconds.

During this time, you cannot turn the power back on with the I / 1 key.

For details on the LAMP/COVER and the TEMP/FAN indicators, see page 35 (GB).

6I / 1 (on / standby) key

Turns on and off the projector when the projector is in the standby mode. The ON/STANDBY indicator lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second.

For details on steps for turning off the power, see “To turn off the power” on page 20 (GB).

7INPUT key

Selects the input signal. Each time you press the key, the input signal switches as follows:

 

B INPUT-A

 

 

B INPUT-B

 

 

 

 

 

 

 

 

 

 

 

b

VIDEO b

 

 

 

S-VIDEO

 

 

 

 

The audio signals are common to the VIDEO and S-VIDEO.

8LIGHT key

If you press this key while the power is on, the keys on the control panel will be displayed in orange. Press this key to turn off the light.

9APA (Auto Pixel Alignment) key Adjusts a picture to be projected clearest automatically while a signal from the computer is input. Adjust the shift (up/down and left/right) at the same time automatically.

Note

Press the APA key when the full image is displayed on the screen. If there are black edges around the image, the APA function will not function properly and the image may extend beyond the screen.

q; RESET key

Resets the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen.

qa ENTER key

Enters the settings of items in the menu system.

11 (GB)