The INPUT SETTING Menu

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.

Unadjustable items depending on the input signal are not displayed in the menu.

When the video signal is input

INPUT SETTING

 

VIDEO

 

 

ASPECT:

16:9

 

SHIFT

H: 200

V: 30

 

 

NO.01

Memory No.

 

 

VIDEO/60

 

 

 

 

Signal type

When the RGB signal is input

 

 

INPUT SETTING

 

INPUT-A

 

 

 

 

DOT PHASE:

0

 

 

SIZE H:

1056

 

 

SHIFT

H: 200

V: 30

 

SCAN CONV: ON

 

 

 

 

NO.17

Memory No.

 

 

800x600

 

Signal type

Operation

1. Select an item

Use the M or m key to select the item, then press the

,or ENTER key.

2. Adjust an item

• When changing the adjustment level:

To increase the number, press the M or , key. To decrease the number, press the m or < key. Press the ENTER key to restore the original screen.

• When changing the setting:

Press the M or m key to change the setting.

Press the ENTER or < key to restore the original screen.

DOT PHASE

Adjusts the dot phase of the LCD panel and the signal input from the INPUT A/B connector. Adjust the picture further for finer picture after the picture is adjusted with pressing the APA key.

Adjust the picture to where it looks clearest.

SIZE H

Adjusts the horizontal size of picture input from the INPUT A/B connector.

The higher the setting, the larger the horizontal size of the picture.

The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal. For details on the suitable value for the preset signals, see page 25 (GB).

SHIFT

Adjusts the position of the picture input from the INPUT A/B connectors or VIDEO IN jacks.

H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.

As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left.

As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the < or the , key to adjust the horizontal position and the M and m key for the vertical position.

ASPECT

Sets the aspect ratio of the picture.

When inputting 16:9 (squeezed) signal from equipment such as a DVD player, set to 16:9.

4:3 : When the picture with ratio 4:3 is input.

16:9 : When the picture with ratio 16:9 (squeezed) is input.

SCAN CONV (Scan converter)

Converts the signal to display the picture according to the screen size.

ON: Displays the picture according to the screen size. The picture will lose some clarity.

OFF: Displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller.

Note

When the XGA or SXGA signal is input, this item will not be displayed.

24 (GB)