Location and Function of Controls

Connector panel

Right side

REMOTE

CONTROL S

VIDEO IN

 

 

 

 

IN

 

 

L

R

RS-232C

S VIDEO

VIDEO

(MONO)

 

PLUG IN POWER

AUDIO

OUTPUT

 

INPUT B

 

 

 

MONITOR

AUDIO

RGB

 

AUDIO

MOUSE

INPUT A

 

 

 

 

 

 

DIGITAL

 

 

 

 

 

RGB RGB

 

 

 

 

 

5BNC

RGB

 

AUDIO

MOUSE

USB

 

 

 

 

 

 

 

DIGITAL RGB

R/R-Y/PR

G/Y B/B-Y/PBSYNC/HD

VD

1INPUT A connectors

1DIGITAL RGB/5BNC/RGB switch: Selects DIGITAL RGB, 5BNC or RGB on INPUT A connectors. Select the appropriate position depending on the input signal.

DIGITAL RGB: Signal input from DIGITAL RGB connector.

5BNC: Signal input from the 5BNC connector.

RGB: Signal input from the RGB connector.

2RGB input connector (HD D-sub 15-pin, female): Connects to the monitor output on a computer using the supplied cable. This connector only accepts signals from a computer.

35BNC input connectors (R/R-Y/PR, G/Y, B/B- Y/PB, SYNC/HD, VD connectors) (BNC type): Connect to a high-resolution computer or VCR where signals are transmitted long distances; for example, when the projector has been hung from the ceiling.

According to the connected equipment, computer, component (R-Y/Y/B-Y), HDTV or DTV (DTV GBR, DTV YPBPR) signal is selected.

4DIGITAL RGB input connector (DFP 20-pin, TMDS): Connects to a digital RGB output connector on external equipment.

5USB connector: Connects your computer or USB equipment.

A plug: (Right, for downstream, 4-pin): Connects to USB equipment.

B plug: (Left, for upstream, 4-pin): Connects to a computer. If you connect the projector and a computer, the projector automatically assumes that a USB mouse is connected; this allows you to control the mouse from the Remote Commander. The application software supplied with the projector allows you to control the projector from your computer.

6MOUSE (13-pin) connector: Connects to the

mouse port on a computer to control the mouse function using the supplied mouse cable.

7AUDIO (stereo mini-jack) jack: Connects to the audio output on a computer.

2INPUT B connectors

Connect to external equipment such as a computer. You can control the mouse signal with the Remote Commander.

RGB input (HD D-sub 15-pin, female): Connects to the monitor output on a computer using the supplied cable. This connector only accepts signals from a computer.

AUDIO (stereo mini-jack): Connects to the audio output on a computer.

MOUSE (13-pin):Connects to the mouse port on a computer to control the mouse function using the supplied mouse cable.

3VIDEO IN jacks

Connect to external video equipment such as a VCR. S VIDEO (mini DIN 4-pin):Connects to the S video

output (Y/C video output) on video equipment. VIDEO (phono type): Connects to the composite

video output.

AUDIO input L (MONO)/R (phono type): Connect to the audio output of equipment. For stereo equipment, use both the L and R jacks; for monaural equipment, use the L (MONO) jack only.

The audio signals are common to the VIDEO and

S VIDEO.

4CONTROL S IN/PLUG IN POWER (DC 5V output) jack

Connects to the control S out jacks of the Sony equipment. Connects to the CONTROL S OUT jack on the supplied Remote Commander when using it as a wired Remote Commander. In this case, you do not need to install the batteries in the Remote Commander, since the power is supplied from this jack.

5RS-232C connector (D-sub 9-pin, female) Connects to a computer to operate the projector from the computer.

12 (GB)