Manuals / Brands / Cell Phone / Cell Phone / Sony / Cell Phone / Cell Phone

Sony XCD-V60, XCD-SX90, XCD-U100, XCD-V60CR, XCD-SX90CR, XCD-U100CR, XCD-V60, XCD-SX90, XCD-U100 ConfigurationROM

1 38

Download 38 pages, 821.16 Kb

ConfigurationROM

The ConfigurationROM is normally used for the OS to identify the device.

The serial number and firmware version of the camera are stored in ConfigurationROM to be used when required. Note that the setting method for the serial number and firmware version information is of Sony’s unique specification and is not compatible with cameras of other manufacturers.

The following explanation uses XCD-V60CR as an example.

		Offset	0-7		8-15	16-23		24-31

Bus Info Block		400h	04		22	ROM CRC

		404h	31		33	39		34

		408h	20		FF	A2		13

		40ch	08		00	46		10	NodeVendorID/ChipID-Hi

		410h	00		37	1A		96	Chip ID-Lo

Root		414h		0003			CRC
Directory
Directory		418h	03		08	00		46	ModuleVendorID
		418h	03		08	00		46	ModuleVendorID

		41ch	0C		00	83		C0

		420h	D1		00	00		01	UnitDirectoryOffset

With the exception of bits 8 to 15 of the 400h offset address field, the length of the entire ConfigROM is made up of 22h Quadlets. Therefore, the ConfigROM from 400h to 48Bh is 140 bytes.

The UnitDirectory offset address is required to be 424h + 000004h × 1 = 424h

		Offset	0-7		8-15	16-23		24-31

Unit Directory		424h	0003				CRC

		428h	12		00	A0		2D	UnitSpecID

		42Ch	13		00	01		02	UnitSoftwareVersion

		430h	D4		00	00		01	UnitDependentDirectory Offset

For offset address 424h, the length of the UnitDirectory is 3 Quadlets.

UnitSpecID (00A02Dh) conforms to 1394TA standards.

UnitSoftwareVersion (000102h) conforms to IIDC Standards, Version 1.3.

The offset address of UnitDependentInfo is required to be 430h + 000001h × 1 = 434h

		Offset	0-7		8-15	16-23		24-31

Unit		434h		000B			CRC
Dependent
Dependent		438h	40		3C	00		00	CommandRegsBase
Info		438h	40		3C	00		00	CommandRegsBase
Info
		43ch	81		00	00		0A	VendorNameLeaf

		440h	82		00	00		0D	ModelNameLeaf

		444h	38		00	00		10	Unit_sub_sw_version

		448h	39		00	00		00	Reserved

		44Ch	3A		00	00		00	Reserved

		450h	3B		00	00		00	Reserved

		454h	3C		00	01		00	Vendor_unique_info_0

		458h	3D		01	00		00	Vendor_unique_info_1

		45Ch	3E		00	00		30	Vendor_unique_info_2

		460h	3F		01	86		A1	Vendor_unique_info_3

Control

17

Contents

Technical Manual XCD-V60CR/SX90CR/U100CR (Color model) XCD-V60/SX90/U100 (Black and white model) Table of Contents Overview Functions Control Specifications Main Features High image quality, high-speedimage output Daisy chain connection Hardware preprocessing Bus synchronization System Components Connection Diagram Location and Function of Parts and Operation Front/Top/Bottom Rear Installation Fitting the lens Using a tripod When power supply from the IEEE1394b connector is insufficient Connecting the camera cable Gain Shutter For long exposure times Absolute Value Control for the Shutter Auto Exposure Gamma Lookup Table 3 × 3 Image Filter Trigger Pan/Tilt Brightness Sharpness (Black and white models only) Saturation (Color models only) White Balance (Color models only) Strobe Control Test Charts Setting AE/AWB Control Frame and Parameters Changing Bayer Patterns (Color models only) Trigger Inhibition Memory Shot Broadcast Command 1394 Bus Synchronization Partial Scan Binning Mode Format7 Mode4 for XCD- V60/V60CR 16-bitMode Control Camera Command Status Register Memory Map ConfigurationROM VendorNameLeaf ModelNameLeaf Control Base Address Inquiring about Supported Video Modes Video Mode Settings (S800) Video Mode Settings (S400) Starting/Stopping Video Transfer (ContinuousShot) OneShot and MultiShot Control of IIDC Standard Features Page Brightness control AE reference control Sharpness control White balance control Hue (G level) control The formula for absolute value shutter control register address Absolute value shutter control CSR offset address Control of IIDC Optional Features PIO control Strobe control Control of Sony’s Unique Features LUT (LookUp Table) Enabling writing the Lookup table Disabling writing the Lookup table 3 × 3 Filter Enabling writing the filter Disabling writing the filter Display of Test Chart Displaying the color bar Trigger Inhibition Enabling Trigger inhibition Disabling Trigger inhibition User Free Memory Enabling User free memory Setting AWB (Auto White Balance) Parameters Enabling AWB parameter setting Disabling AWB parameter setting Setting AE (Auto Exposure) Parameters Enabling AE parameter setting Memory Shot Switching to Memory shot mode Switching to normal mode Operation when the trigger mode is set Notes on the Camera Operations If Frame Rate Decrease Occurs When Using Trigger Mode On Sensitivity in Binning Mode Auto Shutter Control and Absolute Value Shutter Control Specifications Video Modes Supported Fixed format Free format Appendix Spectral Sensitivity (Relative Response) Parameters XCD-V60 XCD-V60CR XCD-U100CR Dimensions