PREPARATIONS

Connection

Plug in the AC power cord to the AC outlet after all other connections are made.

1 Connect the speaker cords to the speakers. Connect the copper cords to the + terminals and the silver

3Connect the supplied antennas.

Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP jack.

FM antenna

AM antenna
Remote control

Detach the battery compartment lid at the rear of the remote control and insert two R6 (size AA) batteries with correct polarity.

En

cords to the – terminals.
R6(AA)
2Connect the speakers to the main unit.

Connect the right speaker to the SPEAKERS R terminals and the left to the SPEAKERS L terminals. The copper cords go to the 0terminals.

4Connect the AC power cord to an AC outlet. The clock will flash on the display.

For setting the clock, see page 8.Speakers

•Do not short-circuit the 0and 9speaker cord leads.

•Do not leave objects generating magnetism or objects affected by magnetism near the speakers.

AntennasKeep antennas away from metallic objects, electrical equipment and cords.

•FM antenna: Extend fully in a T-shape. If reception is poor, connect an optional outdoor antenna to the FM 75 Ω terminals. Be sure to connect the shield braid of the antenna to the 2terminal.

•AM antenna: Rotate to find best reception.

•Replace the batteries with new ones when the operational distance between the remote control and main unit becomes shorter.

•Remove the batteries if the unit is not going to be used for an extended period of time.

•The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.

4