AI Edit Recording
PreparationPrepare a tape that is longer than the CD length.
When recording a whole CD, AI Edit Recording takes the length of your tape into account and rearranges the recording order of the tracks if necessary, so that no track is cut short at the end of the side.
(AI: Artificial Intelligence)
•Recording cannot start from a point halfway in the tape.
•AI Edit Recording cannot be used with discs containing more than 30 tracks.
1Insert the recording tape.
2Press FUNCTION on the remote control to select the CD function, and load the disc.
3Hold down SHIFT and press CD EDIT/CHECK on the remote control in stop mode.
"AI EDIT" and "AI C--00" are displayed.
4Press the numbered buttons on the remote control to enter the length of the recording tape. 10 to 99 minutes can be specified.
- For a 60-minute tape press 6 and 0.
In a few seconds, the unit determines the tracks to be recorded for each side.
The recording time left for side A appears on the display.
• for gcan also be used to specify tape length.
5Press SYNCHRO REC to start recording.
When you start recording with the remote control, press REC MODE repeatedly to display "SYNC REC", then press wREC/REC PAUSE.
The tape is rewound to the beginning of the side facing upward, "REC MUTE" flashes on the display and the lead segment is played through for 10 seconds, and recording starts.
When recording on the side facing upward (side A) finishes, recording on the opposite side (side B) starts.
Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape.
•Recording cannot start from a point halfway in the tape.
•You cannot program more than 30 tracks.
•You cannot program a track with a track number larger than 30.
1Insert the recording tape.
2Press FUNCTION on the remote control to select the CD function, and load the disc.
3Hold down SHIFT and press CD EDIT/CHECK twice on the remote control in stop mode. "PRGM EDIT" and "PRGM
4Press the numbered buttons on the remote control to enter the length of the recording tape.
10 to 99 minutes can be specified.
- For a
•for gcan also be used to specify tape length.
5Press the numbered buttons on the remote control to select the first track to be recorded on side A.
6Repeat step 5 to select the rest of the tracks for side A.
The remaining recording time of side A is displayed. You cannot select a track with a longer playing time.
7Hold down SHIFT and press CD EDIT/CHECK on the remote control to switch to side B and select the tracks for the side.
8Press SYNCHRO REC to start recording.
When you start recording with the remote control, press REC MODE repeatedly to display "SYNC REC", then
press wREC/REC PAUSE.
The tape is rewound to the beginning of the side facing upward, "REC MUTE" flashes on the display and the lead segment is played through for 10 seconds, and
recording starts.En When recording on the side facing upward (side A) finishes, recording on the opposite side (side B) starts.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, hold down SHIFT and press CD EDIT/CHECK on the remote control to select side A or B.
2 Press f or g repeatedly. The track number and program number are displayed in succession.
To change the program of each sideHold down SHIFT and press CD EDIT/CHECK on the remote control to select side A or B, and press sto clear the program for the selected side. Then, select tracks again.
To clear the edit programPress stwice.
15