RADIO OPERATIONS

TUNER/BAND

 

PRESET

 

(N,M)

sCLEAR

f,g POWER

SET

 

PRESET

SET

TUNER MODE

0–10, +10

MODE

 

f

g

 

 

TUNER/BAND

sCLEAR

 

SHIFT

 

 

Tuning in preset stations
1Select the band.
2Press PRESET (N,M) repeatedly.
With each press, the station with the succeeding preset number is tuned in.

You can tune in the desired preset station directly by

En

pressing the numbered buttons on the remote control.

- To select preset number 11, press +10 and 1.

 

- To select preset number 15, press +10 and 5.

 

To clear a preset station

 

1 Tune in the station by preset tuning.

 

Manual tuning

1Press TUNER/BAND repeatedly to select a band. The unit switches to the radio from any other function and alternates between FM and AM.

2Press for grepeatedly to tune in a station. "TUNE" is displayed when a station is tuned in. "STEREO" is displayed for FM stereo reception.

To search for a station automatically (Auto search) Hold down for g.

The unit searches for a station and stops at reception. To stop the search manually, press for g.

•Auto search may not stop at stations with weak signals.

Preset tuning
Preset up to 32 of your favourite stations and tune them in directly.
Presetting stations
1Tune in the desired station.
2Press SET to store the station.
The preset number, beginning from "1" flashes on the display.

3Repeat steps 1 and 2 to preset other stations. The next station will not be stored if a total of 32 preset stations have already been stored.

("FULL" is displayed.)

•The unit can store a maximum of 20 stations for each band. However, that it can only store a total of 32 preset stations.

•If power is interrupted for more than approximately 12 hours, all settings stored in memory after purchase need to be reset.

2Press s, then press SET within 8 seconds.

Preset station numbers in the band which are higher than the cleared number decrease by one.

11